Carrier Touch Pilot Junior Manual page 17

Temperature Menu – TEMP
Status
Point name
1 EWT -
2 LWT -
3 OAT -
4 CHWSTEMP -
5 SCT_A -
6 SST_A -
7 SCT_B -
8 SST_B -
9 DEFRT_A -
10 DEFRT_2 -
11 sgtc1 -
12 sgtc2 -
*Depends on the selected language (English by default).
Pressure Menu – PRESSURE
Point name Status
1 DP_A -
2 SP_A -
3 DP_B -
4 SP_B -
*Depends on the selected language (English by default).
Inputs Menu – INPUTS
Point name Status
1 ONOFF_SW open/close
2 HC_SW open/close
3 on_ctrl xxx
4 SETP_SW open/close
5 LIM_SW1 open/close
6 LIM_SW2 open/close
7 LIM_ANAL -
8 FLOW_SW open/close
9 leak_v -
10 leak_2_v -
11 DSHT_SW open/close
12 PWRIN_ST open/close
13 HP_SWA open/close
14 HP_SWA3B open/close
15 bacdongl no/yes
*Depends on the selected language (English by default).
Unit Displayed text*
°C / °F Entering Water Temp
°C / °F Leaving Water Temp
°C / °F External Temperature
°C / °F Common Master/Slave Temp
°C / °F Saturated Cond Tmp A
°C / °F Saturated Suction Tmp A
°C / °F Saturated Cond Tmp B
°C / °F Saturated Suction Tmp B
°C / °F Defrost Temp Cir A
°C / °F Defrost Temp Second Coil
°C / °F Suction Gas Temp Coil 1
°C / °F Suction Gas Temp Coil 2
Unit Displayed text*
kPa / PSI Discharge Pressure A
kPa / PSI Suction Pressure A
kPa / PSI Discharge Pressure B
kPa / PSI Suction Pressure B
Unit Displayed text*
Remote On/Off Switch
-
- Remote Heat/Cool Switch
- Current Control
- Remote Setpoint Switch
- Limit Switch 1
- Limit Switch 2
mA Limit Analog Input
- Flow Switch
V Leakage detector #1 val
V Leakage detector #2 val
- Desuperheater Switch
- Power Input Stable
- HP Switch Circuit A
- HP Switch Circuit A3/B
- BACnet Dongle
Description
Entering water temperature: Used for capacity control
Leaving water temperature: Used for capacity control
Outdoor air temperature: Used to determine a number of control
mechanisms such as heat/cool changeover, water exchanger
heater operation, defrost cycle
Common master/slave temperature
Saturated condensing temperature, circuit A
Saturated suction temperature, circuit A
Saturated condensing temperature, circuit B
Saturated suction temperature, circuit B
Defrost temperature, circuit A (heat pumps only)
Defrost temperature on the second coil on circuit A (heat pumps
only)
Suction gas temperature coil 1
Suction gas temperature coil 2
Description
Compressor discharge pressure, circuit A
Compressor suction pressure, circuit A
Compressor discharge pressure, circuit B
Compressor suction pressure, circuit B
Description
Remote On/Off switch
Remote Heat/Cool switch
Current control status: Off, On Cool, On Heat, On Auto
Remote setpoint switch
Demand limit switch 1
Demand limit switch 2
Limit Analog Input 4-20mA
Water exchanger flow switch
Leakage detector 1
Leakage detector 2
Desuperheater switch
Power input stable
High pressure switch, circuit A
High pressure switch, circuit B
BACnet dongle status (BACnet option)
17