Carrier Touch Pilot Junior Manual page 21

General Config Menu – GENCONF
Point name Status
1 lead_cir 0 to 2
2 seq_typ no/yes
3 ramp_sel no/yes
off_on_d
4 1 to 15
5 nh_limit 0 to 100
6 nh_start 00:00
7 nh_end 00:00
8 bas_menu 0 to 3
*Depends on the selected language (English by default).
Pump Configuration Menu – PUMPCONF
Point name Status
1 pump_seq 0 to 4
2 pump_del 24 to 3000
3 pump_per no/yes
4 pump_sby no/yes
5 pump_loc no/yes
*Depends on the selected language (English by default).
Heat/Cool Config Menu – HCCONFIG
Point name Status
1 auto_sel no/yes
2 cr_sel 0 to 3
3 hr_sel 0 to 3
4 heat_th -20.0 to 0.0
-4.0 to 32.0
5 boil_th -15.0 to 15.0
5.0 to 59.0
6 ehs_th -5.0 to 21.1
23.0 to 70.0
7 both_sel no/yes
8 ehs_back no/yes
9 ehs_pull 0 to 60
10 ehs_defr no/yes
*Depends on the selected language (English by default).
Reset Config Menu – RESETCFG
Point name Status
1
2 oatcr_no -10.0 to 51.7
14.0 to 125.0
3 oatcr_fu -10.0 to 51.7
14.0 to 125.0
4 dt_cr_no 0 to 13.9
0 to 25.0
5 dt_cr_fu 0 to 13.9
0 to 25.0
Default Unit Displayed text*
0 - Cir Priority Sequence
0=Auto 1=A Lead 2=B Lead
no - Staged Loading Sequence
no - Ramp Loading Select
Unit Off to On Delay
1 min
100 % Night Capacity Limit
00:00 - Night Mode Start Hour
00:00 - Night Mode End Hour
Basic Menu Config
0 -
0 = All Access
1 = no alarm menu
2 = no setpoint menu
3 = 1 + 2
Default Unit Displayed text*
0 - Water Pumps Sequence
0 = No Pump
1 = One Pump Only
2 = Two Pumps Auto
3 = Pump#1 Manual
4 = Pump#2 Manual
48 hour Pump Auto Rotation Delay
no - Pump Sticking Protection
no - Stop Pump During Standby
Flow Checked if Pump Off
yes -
Default Unit Displayed text*
no - Auto Changeover Select
0 - Cooling Reset Select
0 - Heating Reset Select
1=OAT,
2=Delta T
3= Analog (4-20mA)
-15.0 °C Heating OAT Threshold
5.0 °F
-9.9 °C Boiler OAT Threshold
14.2 °F
5.0 °C Elec Stage OAT Threshold
41.0 °F
no - HSM Both Command Select
no - 1 Elec Stage For Backup
0 min Electrical Pulldown Time
no - Quick EHS For Defrost
Default Unit Displayed text*
COOLING RESET
-10.0 °C OAT No Reset Value
14.0 °F
-10.0 °C OAT Full Reset Value
14.0 °F
0 ^C Delta T No Reset Value
0 ^F
0 ^C Delta T Full Reset Value
0 ^F
Description
Circuit priority sequence
0 = Automatic changeover
1 = Circuit A lead
2 = Circuit B lead
Staged loading sequence
Ramp loading sequence
Unit OFF to ON delay
Night capacity limitation
Night mode start hour
Night mode end hour
Basic menu configuration
0 = All access
1 = Alarm menu
2 = Setpoint menu unavailable
3 = Alarm and Setpoint menus are unavailable
Description
Water pumps sequence
0 = No pump
1 = One pump only (units with one pump)
2 = Two pumps automatic control
3 = Pump 1 selected (units with two pumps)
4 = Pump 2 selected (units with two pumps)
Pump automatic rotation delay
Pump sticking protection
Pump stopped when the unit is in standby
Water flow is checked when the pump is off
Description
Heating/Cooling automatic changeover
Cooling reset
Heating reset
0=None 0 = No reset
1 = Reset based on OAT
2 = Reset based on delta T
3 = Reset based on analog input (4-20 mA)
Heating OAT threshold
Boiler OAT threshold
Electric heating stage OAT threshold
HSM command
Electric heating stage for back-up
Electrical pull-down time: It defines the time
between starting the unit and determining whether
the electric heating stage should be started
Quick electric heating used for defrost
Description
Cooling reset parameters
OAT no reset value
OAT full reset value
Delta T no reset value
Delta T full reset value
21