AXIOMTEK SHB150 Series User Manual page 67

3. Configuring RAID by the RAID BIOS.
Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed if you
do not want to create a RAID.
3.1. After the POST memory testing and before the operating system booting, a message
"Press <Ctrl-I> to enter Configuration Utility" shows up, accordingly. Press <Ctrl + I> to
enter the RAID BIOS setup utility.
3.2. After you press <Ctrl + I>, the Create RAID Volume screen will appear. If you want to
create a RAID array, select the Create RAID Volume option in the Main Menu and press
<Enter>.
Configuring SATA for RAID
SHB150 LGA1151 Full-size CPU Card
61