Nonin 8500 Operator's Manual page 32

Specifications
Oxygen Saturation Display Range
Pulse Rate Display Range
Accuracy - Sensors
Measurement Wavelengths and Output Power*
Indicators
Pulse Quality Indicator: LED, tricolor
Temperature
Storage/Transportation: -40 to +70 °C (-40 to +158 °F)
Time (from storage) for monitor to be ready:
Humidity
Storage/Transportation: 10 to 95% noncondensing
Altitude
Power Requirements
Dimensions
Weight
Classifications per IEC 60601-1 / CAN/CSA-C22.2 No. 601.1 / UL60601-1
Enclosure Degree of Ingress Protection
* This information is especially useful for clinicians performing photodynamic therapy.
This device is not made with natural rubber latex.
26
0 to 100% SpO
18 to 321 beats per minute (BPM)
Declared accuracy data for compatible sensors can be found in
Nonin's Sensor Accuracy document.
Red: 660 nanometers @ 0.8 mW max. avg.
Infrared: 910 nanometers @ 1.2 mW max. avg.
Numeric Displays: 3-digit 7-segment LEDs, red
Operating: -20 to +40 °C (-4 to +104 °F)
5 minutes to warm from -40 °C to -20 °C
for its intended use: 5 minutes to cool from 70°C to 40 °C
Operating: 10 to 90% noncondensing
Operating: Up to 4,000 meters (13,123 feet)
Hyperbaric Pressure: Up to 4 atmospheres
Six 1.5V AA-size alkaline batteries. 100 hours maximum display
brightness; 160 hours with normal display brightness.
8 cm W x 15 cm H x 2.5 cm D
(3 in W x 6 in H x 1 in D)
280 g (10 oz) (with alkaline batteries)
Type of Protection: Internally powered (on battery power)
Degree of Protection: Type BF-Applied Part
Mode of Operation: Continuous
IP33
2
Technical Information