Dimensions And Mounting - Honeywell Spyder 5 WEB-RxxN Series Installation Manual

SPYDER MODEL 5 ROOM CONTROLLERS − INSTALLATION GUIDE

DIMENSIONS AND MOUNTING

Housings
The controller is available in two housing sizes, both
conforming to IP20:
▪ WEB-RL6N (large housing): W x L x H =
4-5/16 x 7-13/16 x 2-5/16 in (110 x 198 x 59 mm) and
▪ WEB-RS5N (small housing): W x L x H =
4-5/16 x 6-3/8 x 2-5/16 in (110 x 162 x 59 mm)
See also Fig. 2 and Fig. 3.
REMOVABLE
TERMINALS
2-1/4
(57)
C2+ C2-
26
27
2-5/16
(59)
2-1/8 (53.5)
1-3/4
(45)
2 (52)
1 2
L N
1/8 (3.5)
Fig. 2. WEB-RL6N dimensions in inch (mm)
REMOVABLE
TERMINALS
2-1/4
(57)
2-5/16
(59)
2-1/8 (53.5) 1-3/4
(45)
2
(52)
1/8
(3.5)
Fig. 3. WEB-RS5N dimensions in inch (mm)
The unit is suitable for mounting on a standard rail, on
walls, as well as in wiring cabinets or fuse boxes.
NOTE:
- IP20 provides, Ingress Protection against solid objects
over 12.5mm e.g. hands, large tools. No protection
against liquids.
- IP30 provides, Ingress Protection against solid objects
over 2.5mm e.g. wire, small tools. No protection against
liquids
31-00281ES-01 (EN1B-0664GE51 R0819)
7-13/16
(198)
AO1 AO2 AO3 AO4 AO5 AO6 24V~ GND UI2 UI3 GND UI6 UI7 GND UI10
GND 24V~ WM1 WM2 C1+ C1- GND
32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
BACnet MS/TP
GND 24V~ GND 24V~ GND 24V~ LED UI1 GND UI4 UI5 GND UI8 UI9 GND
SERVICE
28 29 30 31 62 63 64
33 35 37 39 41 43 45 47 49 51 53 55 57 59 61
WEB-RL6N
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
24V~ 24V0 24V~ 24V0 TN T~ T01 TN T02 T03 TN T04 RC4 RO4 IN4 RN RN IN1 RO1 IN2 RO2 IN3 RO3
24 V AC
MODELS
6-3/8
(162)
WM1 WM2 24V~
AO1 24V~ GND AO2 AO3 24V~ GND AO4 UI1 GND UI2 UI3 GND UI4 C1+ C1- GND
22
20 21 BACnet MS/TP
C2+ C2- GND
34 35 36 37 38 39 SERVICE
25 26 27 28 29 30 31 32 33 40 41 42
23 24
WEB-RS5N
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
L N 24V~ 24V0 TN T~ T01 TN T02 RO4 IN4 RN RN IN1 RO1 IN2 RO2 IN3 RO3
24 VAC
MODELS
Terminal Protection Covers for IP30
In the case of controllers mounted outside of a cabinet,
before applying power to the device, Terminal Protection
Covers (10-pc. bulk packs, order no.: IRM-RLC for large
housings and IRM-RSC for small housings) must be
mounted so as to provide IP30.
2-5/16
(59)
3/8 (10)
Fig. 4. Large housing, with terminal protection covers,
3/8
(10)
2-5/16
( 59 )
3/8 (10)
Fig. 5. Small housing, with terminal protection covers,
3/8
(10)
DIN Rail Mounting/Dismounting
MOUNTING
1.
DIN EN 50022-35 x 7,5
Fig. 6. Mounting and dismounting
The unit can be mounted onto the DIN rail simply by
snapping it into place. It is dismounted by gently pulling the
stirrup(s) located at the base of the housing (see Fig. 6).
2
dimensions in inch (mm)
dimensions in inch (mm)
DISMOUNTING
1.
2.
2.
RLxN: 2X
RSxN: 1X