Honeywell Spyder 5 WEB-RxxN Series Installation Manual page 15

Unoccupied Mode
Fig. 146. Example "unoccupied" screens
If is displayed, the controller is in the "unoccupied"
mode.
The user can override the "unoccupied" mode by touching
the upper right softkey. An intermediate screen will then
flash for a few seconds, allowing the user to either cancel
(upper left softkey) or confirm (upper right softkey). If the
user neither cancels nor confirms, this will be considered a
confirmation, and the controller will be placed in the
"overridden to bypass" mode. If, on the other hand, the user
cancels, the controller will revert to the "unoccupied" mode.
If is displayed, the controller is in the "occupied"
mode.
SPYDER MODEL 5 ROOM CONTROLLERS − INSTALLATION GUIDE
Standby Mode
Fig. 157. Example "standby" screens
If is displayed, the controller is in the "standby" mode.
The user can override the "standby" mode by touching the
upper right softkey. An intermediate screen will then flash
for a few seconds, allowing the user to either cancel (upper
left softkey) or confirm (upper right softkey). If the user
neither cancels nor confirms, this will be considered a
confirmation, and the controller will be placed in the
"overridden to bypass" mode. If, on the other hand, the user
cancels, the controller will revert to the "standby" mode.
Occupied Mode
Fig. 168. Example "occupied" display
15 31-00281ES-01 (EN1B-0664GE51 R0819)