Table of Contents
Advertisement
NETRONIX
Reading-out the configuration of freely selected port
5.7.4.
Command frame:
Header C_GetIOConfig
Where:
Parameter name
Reading-out the configuration of freely selected
C_GetIOConfig
IONo
Response frame:
Header C_GetIOConfig +1
Where:
Parameter name
IOConfigData1...n
Some I/O of CTU-M reader has no possibility to toggle port direction.
To accomplish proper configuration, input proper direction option to given port.
LIST OF EXISTING PORTS, WHICH CAN BE DRIVEN IN UW-M4R
Port number
Direction
0
input/output
1
input/output
2
output
3
output
Response frame:
Header C_SetIOConfig +1
Access password
5.8.
Logging to reader
5.8.1.
Command frame:
Header C_LoginUser
Where:
Parameter name
C_LoginUser
NETRONIX
IONo
Parameter description
port.
I/O port number, which configuration is to be
red-out.
IOConfigData1...n
Parameter description
This is the same, as in case of configuration
write.
Data1...n, 0x0
Parameter description
Logging to reader
Value range
0x00...0x05
OperationCode CRC
Value range
Description
GPIO1
GPIO 2
RELAY
BUZZER
OperationCode CRC
Value range
0xb2
CTU-Mxx
CRC
0x52
CRC
.
25
Advertisement
Table of Contents
