Reading The Page Content In Mifare Ul; Writing Values To Transponder Block - Netronix CTU-M Series Technical Data Sheet

NETRONIX

Reading the page content in Mifare UL

5.6.9.
Command frame:
Header C_ReadPage16B
Where:
Parameter name Parameter description
C_ReadPage16B Read-out of page content in Mifare UL
Page address, from which read-out of following
four pages should start. If PageAdr>0x????,
PageAdr
starts read-out process of pages, which are
present at memory beginning.
Response frame:
C_ReadPage16B
Header +1
Where:
Parameter name
Data1...16

Writing values to transponder block

5.6.10.
Command frame:
Header C_WriteValue
Where:
Parameter name Parameter description
C_WriteValue Write of values to transponder block. 0x34
Block number within given sector,
BlockNo
into which the Value will be written.
Declared block number including the
Value copy.
BackupBlockNo has no influence for
BackupBlockNo
system
can/should make the Value copy by
himself.
Value1...4 The Value, which is written to whichever
NETRONIX
PageAdr
Data1...16
Parameter description
Red-out of data from four subsequent
pages.
BlockNo, BackupBlockNo,Value1...4,
operation, but
Value range
0x28
0x00...0x0f
OperationCode CRC
Value range
whichever
Value range
**Sector and
numeration
**Sector and
user numeration
CTU-Mxx
CRC
CRC
block
block
.
19