Disassembly Process (Installing Dimm) - HP RP9 G1 9015 Disassembly Instructions Manual

Install the wireless card atan angle of
45 degree.See photo 1
Take the DIMM and insert in DIMM slot
at an angle of 45 degree.See photo 1
Disassembly process (Do not remove the HDD cage)
EL-MF877-00
Template Revision B
Fasten WIFI screw*1pcs as show in
photo 21.5 + /-0.2Kgf.cm Screw
driver: #1(Crosshead
Screwdriver)See photo 2

Disassembly process (Installing DIMM)

Press the DIMM to confirm the DIMM
insert rightly See photo 2
PSG instructions for this template are available at
Using pressing fixture to insert
cable in location"2".Routing the
cable See photo3&4 Using pressing
fixture to insert cable in location"
1".Routing the cable See photo3&4
Final cable routing for WLAN (
Photo 4)
EL-MF877-01
Page 5