HP RP9 G1 9015 Disassembly Instructions Manual page 4

Push the button on the middle bezel to
each side，see photo 1
Disassemble the
bracket, see photo 4
Pressing the visa cover hook and push
it to the direction show in the photo 7,8
and 9.
EL-MF877-00
Template Revision B
Disassemble the back cover by pulling
it upward and cover See photo 2.
Disassemble the bracket by the red
circle marked position and take off
the bracket, see photo 5
Disassembly process (Installing Wireless Card)
PSG instructions for this template are available at
Take off the rear cover, see photo 3
Lift up the bracket,see photo 6
EL-MF877-01
Page 4