Disassembly Process (Installing Back Cover Bracket) - HP RP9 G1 9015 Disassembly Instructions Manual

Align the visa cover to the bracket
and press the clip to lock on to the
bracket see photo1
Align the rear cover to the unit by
the two latch see photo 1
Disassembly process (Assemble MCR, webcam, BIO reader (If necessary)
EL-MF877-00
Template Revision B

Disassembly process (Installing back cover bracket)

Push the rear cover to end , see picture 2
PSG instructions for this template are available at
Confirm the visa cover locked well,
see photo 2 and 3
Double check the rear cover locked
well, see photo 4
EL-MF877-01
Page 11