HP RP9 G1 9015 Disassembly Instructions Manual page 10

Open the CPU cover and take off
the plastic cover, check whether
there is PIN bend issue,See photo
2 for the bend pin
Put the CPU onto the CPU socket
vertical by fixture, see photo 3 and
4
EL-MF877-00
Template Revision B
Locking the CPU holder, and during this
process, the CPU holder clip will drop
from the CPU holder,take clip away from
the MB, see photo 5 and 6
Disassembly process (Installing visa cover)
PSG instructions for this template are available at
Put the CPU onto the CPU socket
vertical by fixture, see photo 3 and 4
Lock the heat sink to MB, and lock the
3 screws based on the sequence
shown on heat sink,see photo 7and 8
EL-MF877-01
Page 10