Connection; Connecting With A Phone; Canceling A Connection With A Phone; Using The Watch In A Medical Facility Or Aircraft - Casio 5596 Operation Manual

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X If the second hand is not point at [C],
hold down (A) for at least 2.5 seconds.
Release the button when the second hand
moves to [C].
This establishes a connection between
the watch and phone.
Important!
If you have problems establishing a
●
connection, it could mean that
OCEANUS Connected is not running
on the phone. On the phone's home
screen, tap the "OCEANUS
Connected" icon. After the app starts
up, hold down the watch's (A) for at
least 2.5 seconds. Release the button
when the second hand moves to [C].
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
OCEANUS Connected: "Watch
settings" n "Connection time". Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
Operation Guide 5596
Canceling a Connection with a
Phone
Pressing (A) terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
30
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y Tap the "OCEANUS Connected" icon.
2.
X Hold down (A) for at least 2.5 seconds.
Release the button when the second hand
moves to [C].
This establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.

Unpairing

1.
X If the watch is connected with a phone,
press (A) to terminate the connection.
Connected
Disconnected
30
2.
Y Tap the "OCEANUS Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
C Pair the watch with a phone.
l
Adjusting Hand and
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
The watch performs alignment of the hour
●
hand, minute hand, and second hand
automatically.
Disconnected
30 30
Day Indicator

Alignment

10