Operation Guide 5537 Before Getting Connecting with a Phone ● I When the watch is standing by for Started... Hold down (C) for at least 1.5 seconds to connection with a phone, the second hand establish a connection with a phone.
Operation Guide 5537 Low Battery Power Shifting the Hands Important! The second hand jumps at two-second intervals. Hand shift moves the hands out of the way for Depending on light intensity and local ● easy viewing of display information. conditions, the watch may become hot to the touch when exposed to light for While holding down (B), press (D).
Operation Guide 5537 Using Mobile Link with Useful Features Note a Mobile Phone Pairing the watch with your phone makes a Actual charging time depends on the ● number of the watch’s features easier to use. local charging environment. While there is a Bluetooth connection...
Operation Guide 5537 Configuring Stopwatch Note Y Perform the operation shown on the Settings phone screen to be paired with. If the watch does not indicate the ● If a pairing prompt message appears, ● You can use the procedures in this section to...
Operation Guide 5537 Enabling or Disabling Alert Sounds ● Viewing Stopwatch Data Note You can configure a setting so the watch beeps when the lap time reaches the target This section explains how to send lap times If you specified TARGET as the target ●...
Operation Guide 5537 Selecting a World Time City Setting the Alarm ● Y Perform the operation shown on the Y Tap the “EDIFICE Connected” icon. phone screen to select a summer time Y Tap the “EDIFICE Connected” icon. setting. X Hold down (C) for at least 1.5 seconds “Auto”...
Operation Guide 5537 Adjusting Hand Alignment Changing the Home City X If the watch is in any mode besides the Summer Time Setting Timekeeping Mode, hold down (D) for at If the hands are out of alignment even though least two seconds to enter the auto time adjustment is being performed, use Timekeeping Mode.
Operation Guide 5537 Disconnecting from a Phone Unpairing Connection Pressing any button will terminate a Bluetooth X If the watch is connected with a phone, Connecting with a Phone connection and return to the Timekeeping press any button to terminate the Mode.
Operation Guide 5537 Getting ready Measuring Lap Times Performing a Stopwatch Enter the Stopwatch Mode. Measurement with a Target Navigating Between Modes Time You can perform lap time measurement operations while checking the difference between the lap time and a target time.
Operation Guide 5537 Interpreting the Difference with the ● Example: Recording a Race Target Time X Use the operations below to measure Lap Time lap times. The difference between a lap time and the target time is indicated by the second hand.
Operation Guide 5537 Viewing Measured Data Lap Times Setting the Countdown Start Records Time A lap time shows the time elapsed during a specific lap. The stopwatch normally shows You can use the procedure below to view lap The countdown start time can be set in 1- the ongoing elapsed time measurement from time records.
Operation Guide 5537 Using the Timer Configuring Alarm Settings Use (E) to select the alarm type. [DAILY]: Alarm sounds every day at the Press (E) to scroll through alarm numbers alarm time. ([AL1] to [AL5]) until the number of the [1TIME]: Alarm sounds only once at the alarm you want to configure is displayed.
Operation Guide 5537 World Time Enabling/Disabling an Alarm Hold down (A) for at least two seconds. or the Hourly Time Signal Release the button when the hours digits World Time lets you look up the current time start to flash.
Operation Guide 5537 World Time City Setting Swapping Your Home Time Hold down (A) for at least two seconds and World Time until the name of the currently selected Use the procedure in this section to select a Home City is displayed.
Operation Guide 5537 Changing the Date Display Keep pressing (D) until the setting item Configure the date and time settings. Format you want to change is selected. To reset the seconds to 00: Press (E). 1 ● Each press of (D) moves to the next is added to the minutes when the ●...
Operation Guide 5537 Light Specifying the Illumination Note Duration The watch has an LED light that you can turn Auto Light is disabled when any one of ● on for viewing in the dark. You can select either 1.5 seconds or three the conditions below exists.
Operation Guide 5537 Hand Alignment Press (D). Use (E) to select [KEY♪] or [MUTE]. Adjustment This enables adjustment of the hour and [KEY♪]: Operation tone enabled. minute hands. [MUTE]: Operation tone muted. Strong magnetism or impact can cause the time indicated by the analog hands to become different from the time on the digital display.
Operation Guide 5537 Moving to Another Time Other Information Returning the Watch to Its Factory Default Settings Zone This section provides non-operational information you also need to know. Refer to Use the procedure below to easily change day This section explains how to return the watch this information as required.
Supported Phone Models One-touch Time Correction Manual connection and time adjustment Phone finder For information about phones that can Watch operation sounds the alert sound connect with the watch, visit the CASIO of the mobile phone. website. https://world.casio.com/os_mobile/wat/...
Automatic switching between standard under applicable radio laws may be a other area where the use of radio waves is not time and summer time. criminal offense. For details, visit the CASIO allowed, use the operations below to stop Timer Settings Website.
I can’t connect after turning off the For information about supported phone phone. models, visit the CASIO Website. Turn on the phone and tap the “EDIFICE https://world.casio.com/os_mobile/wat/ Connected” icon. Then on the watch, hold down (C) for at least 1.5 seconds.
Page 23
Operation Guide 5537 Phone-Watch Connection Changing to a Different The watch does not connect with a phone and adjust its time when I Phone Model press (C). I can’t establish a connection The watch will not adjust its time if you press between the phone and watch.