Time Adjustment
Your watch can obtain date and time
information by connecting with a phone and by
receiving time signals, which it uses to adjust
its settings.
Important!
Disable auto time adjustment
●
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
Using OCEANUS Connected to
l
Configure Settings
Using Watch Operations to
l
Configure Settings
Operation Guide 5596
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time adjustment by connecting with your
phone is recommended.
Auto Time Adjustment
l
Can you receive a time signal in your area?
If you are able to receive a time signal,
time settings can be adjusted in
accordance with a received signal.
Time Calibration Signal Reception
l
Ranges
Selecting a Time Zone
l
Other than the above.
If you are unable to connect with a phone
and are unable to receive a time signal,
you can perform watch button operations
to adjust its time setting.
Using Watch Operations to Adjust the
l
Time Setting
Time Adjustment Using a
Time Signal
Overview
The watch's time and day settings can be
adjusted in accordance with a received time
signal.
Important!
In order to make it possible for the
●
current time setting to be adjusted
correctly based on time calibration
signal reception, you need to specify
the time zone where you are using the
watch.
However, if the watch was unable to
●
connect with a phone even once for
time adjustment during the previous
day while connection with a phone is
being used, it will automatically try to
receive a time calibration signal.
Note
Areas where time calibration signal
●
reception is supported are limited.
When the watch in an area where time
calibration signal reception is not
possible, connect with a phone to
adjust time and day settings.
Time Calibration Signal Reception
l
Ranges
4