Operation Guide 5542 Basic Operations Mode Overview G Last auto time adjustment result The second hand points to [Y(YES)] or This section provides an overview of the watch Timekeeping Mode ● [N(NO)] to indicate the result of the last auto and its operations.
Operation Guide 5542 Stopwatch Mode Stopping Fast Forward/Fast Reverse ● ● Solar Charging The main hour and minute hands indicate the Rotate the crown in the direction opposite that current time. of the ongoing operation or press any button. This watch runs on power supplied from a...
To connect the watch with a phone, first install Medium charge n High 110 hours the CASIO “OCEANUS Connected” app on charge Note the phone and then use Bluetooth to pair the 30 hours High charge n Full charge watch with the phone.
Operation Guide 5542 ● Connecting with a Phone to C Pair the watch with a phone. Note Adjust the Watch’s Time Before you can use the watch in combination with a phone, you first need to pair them. If the watch does not indicate the ●...
Operation Guide 5542 Appropriate Signal Reception Time Calibration Signal Reception Time Adjustment Using a Location Ranges Time Signal A time calibration signal can be received while Time calibration signal reception is supported the watch is near a window. in the areas shown below.
Operation Guide 5542 Auto Time Calibration Signal Manual Time Calibration Signal Checking the Last Time Receive Receive Adjustment Result An automatic time calibration signal receive Place the watch near a window or some operation is performed and the time and day Enter the Timekeeping Mode.
Operation Guide 5542 Using Mobile Link with Using the Watch in a Medical Note Facility or Aircraft a Mobile Phone The connection will be terminated if ● Whenever you are in a hospital, on an aircraft, While there is a Bluetooth connection...
Operation Guide 5542 Unpairing If you purchase another phone Configuring World Time Settings You need to perform the pairing operation X If the watch is connected with a phone, whenever you want to establish a Bluetooth press any button to terminate the Specifying a World Time City with OCEANUS connection with a phone for the first time.
Operation Guide 5542 Configuring the Summer Time Setting Swapping Your World Time and Home ● ● Adjusting Hand and Day Time Indicator Alignment Y Tap the “OCEANUS Connected” icon. Y Tap the “OCEANUS Connected” icon. If the hands and/or date indicator are out of X Hold down (C) for about four seconds.
Operation Guide 5542 Adjusting Time Changing the Home City X If the watch is connected with a phone, Summer Time Setting Settings Manually press any button to terminate the connection. You can use the procedure below to adjust the Y Tap the “OCEANUS Connected” icon.
Operation Guide 5542 Adjusting the Time and Day Configuring the Summer Rotate the crown to move the second Setting Time Setting (Home City) hand to the desired setting for the year one’s digit. The watch’s current time setting can be Pull out the crown to the second click.
Operation Guide 5542 Dual Time Rotate the crown to change the time zone. Hold down (A) for about one second. Dual Time lets you look up the current time in The Dual Time hour and minute hands Each time you hold down (A) for about one various time zones around the globe.
Operation Guide 5542 Stopwatch Adjusting Hand and If the small hour and minute hands, and Day Indicator the small 24-hour hand are not at 12 The stopwatch measures elapsed time in units Alignment o’clock, rotate the crown to align them of one second up to 23 hours, 59 minutes, 59 correctly.
Operation Guide 5542 Other Information After Arriving ● Note Swap the origin time zone time with the This section provides non-operational Leaving the crown pulled out for more destination time zone time. ● information you also need to know. Refer to than approximately 30 minutes without this information as required.
Auto Correction of Hand Home Positions, For information about phones that can The watch is emitting radio waves whenever Power Saving, Battery indicator connect with the watch, visit the CASIO the second hand is pointing to [C]. Power Supply : website.
Signal reception is not possible while For information about supported phone Minimize movement of the watch and do battery power is low. Keep the watch models, visit the CASIO Website. not perform any watch operation while a exposed to light until it recharges http://world.casio.com/os_mobile/wat/ receive operation is in progress.
Page 18
Operation Guide 5542 I can’t reconnect the watch Phone-Watch Connection I can’t establish a connection after disabling the watch’s auto time and phone. adjustment feature. I can’t establish a connection On the watch, enable auto time adjustment, between the phone and watch.
Page 19
Operation Guide 5542 Auto Time Adjustment by Hand Movement and Why is the current time indicated by the watch is off by a large amount of Bluetooth Connection (Time Indications time (nine hours, three hours and 15 Adjustment) minutes, etc.)? I don’t know what mode the watch is...