Kramer FC-102Net User Manual page 18

Function Description
NAME
Set machine (DNS)
name.
The machine name is
not the same as the
model name. The
machine name is used to
identify a specific
machine or a network in
use (with DNS feature
on).
NAME?
Get machine (DNS)
name.
The machine name is
not the same as the
model name. The
machine name is used to
identify a specific
machine or a network in
use (with DNS feature
on).
PROT-VER? Get device protocol
version.
RESET
Reset device.
To avoid locking the
port due to a USB bug in
Windows, disconnect
USB connections
immediately after running
this command. If the port
was locked, disconnect
and reconnect the cable
to reopen the port.
SN?
Get device serial
number.
VERSION?
Get firmware version
number.
FC-101Net, FC-102Net – Protocol 3000
Syntax
COMMAND
#NAMEmachine_name<CR>
FEEDBACK
~nn@NAMEmachine_name<CR><LF>
COMMAND
#NAME?<CR>
FEEDBACK
~nn@NAMEmachine_name<CR><LF>
COMMAND
#PROT-VER?<CR>
FEEDBACK
~nn@PROT-VER3000:version<CR><LF>
COMMAND
#RESET<CR>
FEEDBACK
~nn@RESETOK<CR><LF>
COMMAND
#SN?<CR>
FEEDBACK
~nn@SNserial_number<CR><LF>
COMMAND
#VERSION?<CR>
FEEDBACK
~nn@VERSIONfirmware_version<CR><LF>
Kramer Electronics Ltd.
Parameters/Attributes
– String of up to 15
machine_name
alpha-numeric chars (can include
hyphen, not at the beginning or end)
machine_name – String of up to 15
alpha-numeric chars (can include
hyphen, not at the beginning or end)
– XX.XX where X is a
version
decimal digit
serial_number – 14 decimal
digits, factory assigned
firmware_version – XX.XX.XXXX
where the digit groups are:
major.minor.build version
Example
Set the DNS name of the
device to room-442:
#NAMEroom-442<CR>
Get the DNS name of the
device:
#NAME?<CR>
Get the device protocol
version:
#PROT-VER?<CR>
Reset the device:
#RESET<CR>
Get the device serial number:
#SN?<CR>
Get the device firmware
version number:
#VERSION?<CR>
16