Technical Specifications
This section defines
FC-101Net
Outputs
Input
Port
Control
Power
Environmental
Conditions
Regulatory
Compliance
Enclosure
General
Accessories
Specifications are subject to change without notice at
FC-102Net
Inputs
Output
Port
Controls
Power
Environmental
Conditions
Regulatory
Compliance
Enclosure
General
Accessories
Specifications are subject to change without notice at
FC-101Net, FC-102Net – Technical Specifications
FC-101Net
and
FC-102Net
1 Balanced Stereo Audio/
2 Mono Audio
1 Dante
RS-232
Consumption
Source
Operating Temperature
Storage Temperature
Humidity
Safety
Environmental
Size
Type
Cooling
Net Dimensions (W, D, H)
Shipping Dimensions (W, D, H)
Net Weight
Shipping Weight
Included
2 balanced inputs
Dante
RS-232
Source
Consumption
Operating Temperature
Storage Temperature
Humidity
Safety
Environmental
Size
Type
Cooling
Net Dimensions (W, D, H)
Shipping Dimensions (W, D, H)
Net Weight
Shipping Weight
Included
technical specifications.
On a 5-pin terminal block
On an RJ-45 connector
On a 3-pin terminal block connector
Dante IP control matrix, Kramer Protocol 3000
48V DC, 100mA
48V DC (PoE)
0° to +40°C (32° to 104°F)
-40° to +70°C (-40° to 158°F)
10% to 90%, RHL non-condensing
CE
RoHs, WEEE
Pico TOOL
Aluminum
Convection ventilation
6.2cm x 5.2cm x 2.4cm (2.4" x 2" x 1")
15.7 cm x 12cm x 8.7cm (6.2" x 4.7" x 3.4")
0.08kg (0.2lb)
0.23kg (0.5lb)
2 squares of double-sided adhesive dual lock
tape
www.Kramerav.com
On 3-pin terminal block connectors
On an RJ-45 female connector
On a 3-pin terminal block connector
Dante IP control matrix, Kramer Protocol 3000
48V DC (PoE)
48V DC, 100mA
0° to +40°C (32° to 104°F)
-40° to +70°C (-40° to 158°F)
10% to 90%, RHL non-condensing
CE
RoHs, WEEE
Pico TOOL
Aluminum
Convection ventilation
6.2cm x 5.2cm x 2.4cm (2.4" x 2" x 1")
15.7 cm x 12cm x 8.7cm (6.2" x 4.7" x 3.4")
0.08kg (0.2lb)
0.23kg (0.5lb)
2 squares of double-sided adhesive dual lock
tape
www.Kramerav.com
Kramer Electronics Ltd.
12
Need help?
Do you have a question about the FC-102Net and is the answer not in the manual?