Installation Instructions - Kinetico Premier Compact User Manual

10

Installation instructions

1
Locate:
a:
Ensure the unit can be
positioned on a flat surface.
b:
If sand, silt or turbidity is
present in the water supply,
a separate prefilter should
be installed before the water
softener.
Please note:
The softener can be installed with the
connections on the left or right side of the
cabinet by reversing the components.
2
Remove cardboard:
Ensure all cardboard is removed
from the inside of the softener.
b:
Remove top lid and support bar
(see page 7).
c:
Carefully remove the two pieces
of cardboard, then replace the
support bar and lid.
Kinetico Premier Compact Water Softener Installation Instructions
3
Insert the
blanking plate:
Insert the blanking plate into the
outlet which is not in use.
Lift up into position, then
carefully drop the plate down
into the slot.
4
Test water pressure:
Test incoming pressure to the
unit. A pressure regulating valve
will be required if the pressure
is above 6 bar.