Front Fog Light; Rear Tail, Stop, Turn Signal, Rear Fog, Side Marker And Back-Up Lights - Chrysler Voyager 2001 Operating Information Manual

Table of Contents

Advertisement

Front Fog Light

1. Reach behind the front fascia from under the
vehicle.
2. Pull on the release tab of the bulb access door.
3. Push up on the spring retainer clip and replace
the bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If
the bulb comes in contact with an oily surface,
clean the bulb with rubbing alcohol.
4. Reinstall the bulb access door, making sure to
securely latch the relaese tab.
148
Rear Tail, Stop, Turn Signal, Rear Fog,
Side Marker and Back-up Lights
1. Raise the liftgate.
2. Remove the two light assembly push-in type
fasteners.
3. Squeeze the socket assembly tabs to remove it
from the housing.
4. Twist and pull the bulb to remove it from the
socket.
5. Replace the bulb, reinstall the socket, and
reattach the light assembly.

Advertisement

Table of Contents
loading

Table of Contents