Mini-Trip Computer; Vehicle Information Center - If Equipped - Chrysler Voyager 2001 Operating Information Manual

Table of Contents

Advertisement

To put into a Calibration Mode: Turn on the
ignition switch and set the display to Comp/Temp.
Press the RESET button for at least 10 seconds
until the "CAL" symbol appears. Release the
button(s) and complete three 360° turns in an area
free from large metal objects. The "CAL" symbol
will turn off and the compass will function nor-
mally.
Compass Variance
Compass Variance is the difference between
magnetic North and Geographic North. In some
areas of the world, the difference between mag-
netic and geographic North is great enough to
cause the compass to give false readings. If this
occurs, the compass variance must be set.
To set the variance: Turn the ignition switch ON
and set the display to Comp/Temp. Press the
RESET button for approximately 5 seconds. The
"VAR" symbol will light and the last variance zone
number will be displayed. Press the STEP button
to select the proper variance zone as shown in the
map.
60
Press the RESET button to set the new variance
zone and resume normal operation.

Mini-Trip Computer

This displays information on the following:
• Compass/Temperature
Shows the outside temperature and vehicle direc-
tion.
• Average Fuel Economy (ECO AVG)
Shows the average fuel economy since the last
reset.
• Distance To Empty (DTE)
Shows the estimated distance that can be trav-
eled with the fuel remaining in the tank. This
estimated distance is determined using the kilo-
meter per liter for the last few minutes.
• Instantaneous Fuel Economy (ECO)
Shows fuel economy for the last few seconds.
• Trip Odometer (ODO)
Shows the distance traveled since the last reset.
• Elapsed Time (ET)
Shows the accumulated ignition ON time since the
last reset.
• Off Mode
Shows a blank display.
• Step Button
Push this button to cycle through all the Compass/
Minitrip Computer displays.
• US/M Button
Press this button to convert the display from U.S.
to metric units.
To Reset The Display
Pressing the Reset button once will clear the
resettable function currently being displayed. Re-
settable functions are average fuel economy, trip
odometer and elapsed time. Pressing the reset
button twice within four seconds will clear all
resettable functions. Reset will only occur if a
resettable function is currently being displayed.
Vehicle Information Center — If
Equipped
The vehicle information center, when the appro-
priate conditions exist, displays the following
WARNING messages and symbols. Each mes-
sage is accompanied by a single chime:
• TURN SIGNALS ON (with graphic)
• PERFORM SERVICE
• DOOR AJAR (one or more, with graphic)
• LIFTGATE AJAR (with graphic)
• WASHER FLUID LOW (with graphic)

Advertisement

Table of Contents
loading

Table of Contents