Instrument Cluster Indicator Lights; Turn Signal Indicator; High Beam Indicator; Front Fog Light Indicator - Chrysler 300 2015 User Manual

Hide thumbs Also See for 300 2015:
Table of Contents

Advertisement

W H A T T O D O I N E M E R G E N C I E S

INSTRUMENT CLUSTER INDICATOR LIGHTS

- Turn Signal Indicator

The arrows will flash with the exterior turn signals when the turn signal lever is operated. A tone will
chime, and a DID message will appear if either turn signal is left on for more than 1 mile (1.6 km).
NOTE:
If either indicator flashes at a rapid rate, check for a defective outside light bulb.

- High Beam Indicator

Indicates that headlights are on high beam.

- Front Fog Light Indicator

This indicator will illuminate when the front fog lights are on.
- Vehicle Security Light
This light will flash rapidly for approximately 15 seconds when the vehicle security alarm is arming.
The light will flash at a slower speed continuously after the alarm is set. The security light will also
come on for about three seconds when the ignition is first turned on.
— Electronic Speed Control Set
Indicates that the Electronic Speed Control has been set.
- Adaptive Cruise Control (ACC) ON Indicator
• If your vehicle is equipped with adaptive cruise control, the controls operate exactly the same
as the normal (fixed speed) cruise control with one difference. You can set a specified distance
you would like to maintain between you and the vehicle in front of you.
• If the ACC sensor detects a vehicle ahead, ACC will apply limited braking or acceleration
automatically to maintain a preset following distance, while matching the speed of the vehicle
ahead.
• If the sensor does not detect a vehicle ahead of you, ACC will maintain a fixed set speed.
• For further information on Adaptive Cruise Control (ACC) ON operation and proper use,
refer to "Speed Control " in "Operating Your Vehicle."
NOTE:
Adaptive Cruise Control (ACC) increases the driving convenience provided by cruise control
while traveling on highways and major roadways. However, it is not a safety system and not
designed to prevent collisions.
- Electronic Stability Control (ESC) OFF Indicator Light
This light indicates the Electronic Stability Control (ESC) is off.

- Door Ajar Indicator

This indicator will illuminate when a door(s) is left ajar and not fully closed.
132

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents