Table of Contents
Advertisement
Available languages
Available languages
Save data
As described above, go to the menu for further measuring functions and
select "Save". Confirm your selection by pressing Enter
The existing folders (**folder name) and files (file name.fft) are displayed.
If you wish to create a new folder, press F1
The standard folder and file names consist of the date and time. The
names can be changed in the PC software. Navigate to the target and
press the Menu key
5.1.4
Route measurement
For machine monitoring, the meter has a route mode for route-based data acquisition and the
collected data can be organised via the computer software. To do so, the PC software that comes
with the meter must be installed and the meter must be connected to the PC.
5.1.4.1
Route creation
.
to save the measurement.
© PCE Instruments
.
Enable the upload function for
"templates".
To do so, either click on the tool
icon (highlighted) in the bar or
access the function via "Service
→ Setup".
Tick the box in front of "upload
templates as route- file into
USB-devices".
Confirm your entry by clicking on
the "Save" button.
26
Advertisement
Table of Contents
