Table of Contents
Advertisement
Available languages
Available languages
Via the F1
key, the chart of measured values can be displayed during the measurement. Via the
navigation key
, you can switch between FFT analysis and time signal. The time signal is shown
in the following image.
1. Time signal graphic
2. Time signal
3. Peak-Peak value
4. Max. amplitude and consecutive sample number
5. Unit of measuring mode
6. Current RMS value
5.1.3
Further measuring functions
Press the Menu key
settings you wish to make by using the
press the Back key
to continue the measurement.
Function
Description
Save
Save data
Format
Format of graphic
Zoom
Zoom graphic
Audio Out
Change volume
during the measurement to open further measuring functions. Go tot he
keys and change the values with the
Values
/
linear, log
all, 1 pixel, 2 pixels
0 ... 100 %
© PCE Instruments
25
keys. Then
Advertisement
Table of Contents
