1-4-2. Installing the Connector Board
The board slot
Name of option
Name of board
MKE-8020A
CN-2153 board
Installation procedure
Parts required (Supplied accessory of MKE-8020A)
. Connecting cable
. Cable holder bracket
1. Remove the two screws and remove the cover panel.
n
Store the removed cover panel in a safe location.
B3 x 5
2. Insert the connector board horizontally level and
secure it with the two fixing screws.
Fixing screw
Connector board
Fixing screw
1-6
Slot on the rear side
1
Slot 1
Cover panel
Slot 1
Connecting the connecting cable
3. Remove the two screws of the slot 2 cover panel.
B3 x 5
4. Connect the connecting cables to the connectors.
Connecting cables
Cover panel
(Slot 2)
Connectors
MVE-8000A