Sony HK-PSU02 Installation Manual page 11

4. While the eject levers are kept open as shown in the
illustration, insert the plug-in board into the board
guide rails.
Eject levers
Name of option Name of board
MKE-8040A DVP-30A board
*1 : The DVP-30A boards are assigned to the following channels in
accordance with the slots to which the boards are inserted.
Slot
2
3
MVE-8000A
Plug-in board
Slot on the front side
*1 2, 3
Channel
CH1, CH2
CH3, CH4
5. While closing the eject levers in the direction of arrow,
push in the plug-in board.
Eject lever
Plug-in board
6. Attach the plug-in board loose-proof assembly and the
front door assembly by reversing the installation steps
2, 3.
Eject lever
Plug-in board
1-5