Dcs52 Display; Home Operations Screen - Digitrax Zephyr Express DCS52 Manual

section 2.1 When entering values like loco or switch addresses this key
can be used to backspace.
5. The 0-9 Numeric Keys are used for any numerical input that is required.
During normal operation these keys control locomotive functions on and
off, with the 2 key being a special non-latching key. In loco selection and
switch mode these keys are used to select locomotive and switch address-
es. In Menus screens these keys are used make numerical menu selections
and input data values.
6. The Exit/Stop Key is used to exit a current task. Pressing it will immedi-
ately exit back to the Home Operations Screen from any other screen or
menu.
7. The A,B,C Soft Keys are context sensitive keys that change meaning
depending on mode or menu you have selected on the DCS52. The current
purpose of each Soft Key is shown in small text directly above the key in
the Display.

5.3 DCS52 Display

The DCS52 Display is a 2.4 inch color LCD screen. The screen will provide
you with a variety of information and input prompts to assist in running loco-
motives and system setup. In this section we will outline the Home Operations
Screen, other menu displays will be covered in their respective sections.
NOTE: The display is best viewed from directly above, viewing the screen at
some angles may distort the perceived screen colors and actions.

5.3.1 Home Operations Screen

This is the primary operations screen for the DCS52. This is the screen you
will see most often when operating trains. The Home Operations Screen and
it's components are shown below. The below example is shown with a locomo-
tive selected. If you ever get lost you can always press the Exit/Stop Key to
return to this screen.
0 1 2 3 4 5 6 7 8 9
Local Throttle Active
sp 0 %
R
Fn+00
© 2019 Digitrax, Inc.
Trk USB Ln
0003
Active Info+
1. Status Bar
2. Switch/Info + Area
3.Function Bar
4. Loco Info Area
5. Jump Throttle Area
6. Scrolling Help Text
7. Soft Key Bar
12
12
www.digitrax.com