Table of Contents
Advertisement
Spray Plate - Removal and Installation
Spray Plate Removal
1.
Turn
the
anticlockwise to the massage spray
setting.
2.
Unclip and remove the adjuster ring.
3.
Unscrew the spray plate assembly in
an anticlockwise direction. The 'O'
seals will provide some resistance.
4.
Remove the massage turbine and the
nozzle ring retainer.
Spray Plate Installation
1.
Make sure that the four 'O' seals,
massage turbine and nozzle ring
retainer are all correctly fitted.
2.
Turn the flow divertor fully clockwise.
3.
Carefully screw the spray plate
assembly on to the flow divertor
4.
Align the inner teeth on the adjuster
ring with the teeth on the handset flow
divertor. Clip the adjuster ring into
position.
adjuster
ring
fully
'O' Seal
Nozzle Ring
Retainer
Teeth
15
Handset Body
Assembly
Nozzle Ring
Retainer
Massage
Turbine
Spray Plate
Assembly
Adjuster Ring
Spray Plate
Assembly
'O' Seal
Massage
Turbine
'O' Seal
'O' Seal
Flow
Divertor
Spray Plate
Assembly
Adjuster Ring
Inner Teeth
Advertisement
Table of Contents
