Airflow Modes; Timer (Automatic Switch Off Time); Cleaning And Care; Cleaning The Blade And The Safety Guard - Silvercrest SV 60 A1 Assembly, Operating And Safety Instructions

˜ Airflow modes
Press repeatedly to select the desired
22
airflow mode:
Press Mode description
Natural
1x
through different airflow speeds .
Amending airflow speed: In natural
mode, press
1x Mainly low speed
2x Half low half high speed
3x Mainly high speed
2x Sleep
3 different speed modes (if started
from speed mode 3) . The product
decreases the speed mode in
15 minute increments and then stays at
the lowest speed mode .
Soft
3x
Normal – constant airflow at the
4x
currently selected airflow speed
(from 1 to 6) .
NOTE: The normal mode is the
default mode once power is on .
˜ Timer (automatic
switch off time)
When the product is on, press
continuously to set the automatic turn off time .
You can choose from 1 to 8 hours .
– constant cycling
repeatedly:
21
– constant cycling through
– constant soft airflow .
24
˜ Cleaning and care
Before cleaning, press
product from the power supply to completely
switch off the product . Remove the battery from
the remote control
m
WARNING! Do not immerse the electrical
parts of the product in water or other liquids .
Never hold the product under running water .
Clean the product with a slightly moistened
cloth .
Do not allow any water or other liquids enter the
product's interior .
Do not use abrasives, harsh cleaning solutions or
hard brushes for cleaning .
Let all parts dry afterwards .
˜ Cleaning the blade and the
safety guard
Dust collections on blade
2 / 6 can be removed with a brush (not
supplied) . In case of serious soiling, the front
grille can be removed for thorough cleaning .
6
To do so, reverse the steps of the "Assembly"
chapter .
Wipe the grilles 2 / 6 and blade
a damp cloth . For stubborn soiling use a mild
detergent on the cloth . Dry completely before
re-assembling them .
NOTE: The grilles 2 / 6 act as safety guards
to protect the user from touching the blade
m
DANGER! Ensure that the product is switched
off from the supply mains before removing the
guard .
Mount the front grille
when cleaning is complete .
and unplug the
23
before cleaning .
31
and on the grilles
4
with
4
back onto the product
6
GB
.
4
13