Before Using; Display Backlight - Auriol H14371 Operation And Safety Notes

When inserting the battery ensure the correct polarity! This is shown
in the battery compartment!
If necessary, clean the battery and device contacts before inserting
the battery!
Promptly remove drained batteries from the product!

Before using

Note: unplugged from the mains the light alarm clock only has two
emergency functions (clock and electronic alarm signal). An electric
connection is therefore required prior to use.
First remove the protective film from the display
clock.
A plastic strip protrudes from the battery compartment cover
the bottom of the light alarm clock. Remove this plastic strip to utilise
the inserted batteries.
Plug the low voltage plug
voltage jack
adapter into an easily accessible outlet.
Your light alarm clock is now in clock mode. The clock starts at 0:00.

Display backlight

The slider allows you to adjust the backlight of the display. Choose
14
from the settings OFF, LOW and HI.
10 GB/IE
16
on the light alarm clock and plug the mains
18
of the mains adapter
of the light alarm
2
on
20
into the low
15