Trial Run - Scilogex HB120-S User Manual

4.2 Display
Temperature display area
Figure 3 Digital hotplate model
Characters
Temperature Press the temperature switch button, the
display area characters in temperature display area will
be flashing, and then rotate the parameter
setting knob to set the target temperature,
press the parameter setting knob to turn on
the setting.
When the heating function is switched
ON, the LED temperature light will turn
green, and the temperature display area
displays the temperature real value until
real temperature reaches the set point.
Time display Press the
area characters in time display area will be
flashing, and then rotate the parameter
Time display area
Descriptions
time switch button,
setting knob to set the target time, press
the parameter setting knob to turn on the
setting. The LED time light will turn
green, then start countdown.

5. Trial Run

• Make sure the required operating voltage and power
supply voltage match.
• Ensure the socket must be properly grounded.
• Add the medium into the vessel
• Place vessel on the work plate.
• Plug in the power cable ensure the power is on and begin
initializing.
• Set the target temperature and begin.
• Set the time, if not, the machine will work continuously
• Observe the LED display
• Stop the heating and stirring functions.
If these operations above are normal, the device is ready to
operate. If not, the device may be damaged during
transportation, please contact manufacturer/supplier for
the
technical support
6
Table 3