run.
7. Stirring
The function "stirring" of LED digital model is switched
on or off via pushing on/off speed control knob. The
speed range of
to 1500 rpm and in steps of 10 rpm.
The function "stirring" of classic model is switched on
or off via rotating speed control knob. The speed range of
0 to 1500 rpm.
8. Faults
•
Instruments can't be power ON
- Check whether the power line is unplugged
- Check whether the fuse is broken or loose
•
Fault in power on self test
-
Switch OFF the unit, then switch ON and reset
the instruments to factory default setting.
•
Stir speed cannot reach set point
-
Excessive medium viscosity may cause abnormal
speed reduction of the motor
•
Unit cannot be powered off when switched off.
-
Check if the residual heat warning function is still
ON and hotplate temperature is above 50
LED screen still work and "Hot" flash).
If
these
faults
are
manufacturer/supplier.
10
not
resolved,
please
contact
(the
Need help?
Do you have a question about the SCI280-Pro and is the answer not in the manual?