Sr27A/Sr67A - Mitsubishi Electric Melservo MR-J5 Series User Manual

SR27A/SR67A

Cable structure
Prepare a cable based on the following configuration diagram.
■For the linear servo motor
• MR-J5-_/MR-J5W_-_G
MR-J5-_
CN2
or
MR-J5W_-_G
CN2A
CN2
CN2B
*1
CN2C
*1 The connection to CN2C is for the MR-J5-_ 3-axis servo amplifier. MR-J5-_ 2-axis servo amplifier does not have CN2C.
*2 This option is manufactured by Magnescale. It should be prepared by the customer.
*3 For connectors for thermistor signals, change the connection method depending on the customer's system.
• MR-J5-_-RJ
MR-J5-_-RJ
CN2
CN2
CN2L
*1 This option is manufactured by Magnescale. It should be prepared by the customer.
*2 For connectors for thermistor signals, change the connection method depending on the customer's system.
1 LINEAR ENCODER
42
1.5 Linear encoder manufactured by Magnescale
Branch cable
MR-J4THCBL03M
SCALE
*3
THM
Branch cable
MR-J4THCBL03M
SCALE
*2
THM
*2
Encoder cable (model: CH23)
Thermistor of linear servo motor
*1
Encoder cable (model: CH23)
Thermistor of linear servo motor
Linear encoder
SR27A/SR67A
Linear encoder
SR27A/SR67A