Parking Brakes - Vermeiren V Series Installation Manual

3.5

Parking brakes

CAUTION
Always adjust the parking brakes after adjustment of rear-wheel position. Readjust also when
tyres are worn, to compensate the wear.
Adjust the correct braking force
1. Release the brake with lever (21), see instruction manual.
1. Loosen socket screws (22) to make the brake free to slide.
2. Slide the brake over the guide (23) to the desired position.
3. Retighten the socket screws (22).
4. Verify if the brake is working properly: the wheel is blocked, but the brake can be operated
easily. If this is not the case repeat th e steps above..
5. Repeat this adjustment for the second parking brake. Make sure both brakes are adjusted
identically.
21
V300
V300 30°
V300XL
V300ACT
Risk of injuries
22
23
V300DC
V300F
V300XR
Installation manual
- 13 -
V-series wheelchairs
Adjustments
22
21
V300DL V500
EN
NL
2018-10
PL
CS
23