Setting Up The Lcd Projection Tv Automatically - Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual

Setting Up the LCD Projection TV Automatically

Using Auto Setup
After you finish connecting your LCD projection TV, you need to run Auto
Setup to set up available analog and digital channels. The Auto Program
screen appears when you turn your LCD projection TV on for the first time
after installing it. If you do not want to set up the channels at this time, you
can do it later by using the Auto Program feature in the Channel menu (see
page 96).
✍
The Auto Setup feature does not apply for installations that use a cable
box for all channel selection.
1
Press POWER on the front panel of your LCD projection TV to turn on
the LCD projection TV.
The Initial Setup screen appears.
2
Move the arrow button up or down to select the desired on-screen
display language, and press the
"Start auto program now?" appears.
3
Move the arrow button up or down to select "Yes," and press the
button.
Auto Program automatically creates a list of receivable channels.
✍
Auto Program may take up to 30 minutes to complete. A progress bar is
displayed while the channel list is being created.
LCD projection
TV front panel
i.LINK
MENU
✍
You can run Auto Program by selecting it in the Channel menu, as
described on page 96.
Installing and Connecting the LCD Projection TV
button.
i-LINK
VIDEO 2 IN
S VIDEO VIDEO L–AUDIO–R VOL CH
MENU TV/VIDEO
VOL CH
TV/VIDEO
POWER
45