Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual page 28

Installing and Connecting the LCD Projection TV
Cable Box and Cable
Only
28
For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑
You do not have a VCR. (If you have a VCR, see pages 32 and 33.)
With this connection you can:
❑
Use the LCD projection TV remote control to change channels coming
through the cable box to the LCD projection TV's VHF/UHF input jack.
(You must first program the remote control for your specific cable box;
see "Programming the Remote Control" on page 48.)
❑
Use the LCD projection TV remote control to change channels coming
directly into the LCD projection TV's CABLE input. (The LCD
projection TV's tuner provides a better signal than the cable box.)
CATV cable
About Using This Connection with Dual Picture (Twin View, etc.)
Features
With this connection, you can use all the dual picture features for unscrambled
channels coming directly into the LCD projection TV's CABLE input jack.
Notes on Using This Connection
To Do This ...
Use the cable box
Set up the LCD projection TV
remote control to operate the
cable box
Activate the remote control to
operate the cable box
Splitter
IN
Coaxial
Cable box
cable
Coaxial cable
Rear of LCD projection TV
Do This ...
Tune the LCD projection TV to the channel the
cable box is set to (usually channel 3 or 4) and
then use the cable box to switch channels.
Program the remote control. See "Programming
the Remote Control" on page 48.
Press FUNCTION
CABLE
indicator lights up.
Coaxial cable
OUT
CABLE
VHF/UHF
SAT/
repeatedly until the