Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual page 23

Front Panel of LCD projection TV
S VIDEO
Front panel connectors are in the control panel
cover. To open and close the cover, refer to page 21.
Connection Description
1 VHF/UHF
Connects to your VHF/UHF antenna or cable box output
jack.
2 CABLE
Connects to your cable signal. This CABLE input jack, in
conjunction with the VHF/UHF input jack, lets you set up
your LCD projection TV to switch between scrambled
channels (coming through a cable box) and unscrambled
cable channels. For details, see page 28.
3 i.LINK
Connects to i.LINK-compatible devices. These terminals
are not intended for connection with personal computers.
4 S VIDEO
Connects to the S VIDEO OUT jack of your VCR or other
(Front and rear)
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN
jack.
5 VIDEO/
Connects to the audio and video OUT jacks on your VCR
(L/R) AUDIO
or other video component. A fourth video input (VIDEO 2)
(Front and rear)
is located on the front panel of the LCD projection TV.
Installing and Connecting the LCD Projection TV
VIDEO 2 IN
VIDEO L–AUDIO–R
(MONO)
MENU
(Continued)
23