Connecting A Dvd Player With Component Video Connectors - Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual

Installing and Connecting the LCD Projection TV
Connecting a DVD Player with Component
Video Connectors
DVD player
40
This is the preferred hookup to use if:
❑
Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the DVD player's
Y, B-Y and R-Y jacks to the Y, P
TV. Use the HD/DVD IN 5 or 6 connections.
✍
The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled
Y, C and C , or Y, P
B R
2
Using an audio cable, connect the DVD player's Audio OUT jacks to
the LCD projection TV's AUDIO IN jacks. Be sure to use the same row
of inputs that you used for the video connection (HD/DVD IN 5 or 6).
VMC-10 (not supplied)
RK-C310/C320/C330 (not supplied)
✍
To take advantage of the Wide Screen modes, set the TV's aspect
ratio to 16:9 on your DVD player. For details, refer to the operating
instructions supplied with your DVD player.
and P jacks on the LCD projection
B R
and P . If so, connect the cables to like colors.
B R
P
P
AUDIO-R (red)
AUDIO-L (white)
Rear of LCD projection TV
Y
B
R