Setting Up The Lcd Projection Tv Automatically - Sony KF-60DX100 Service Manual

Installing and Connecting the LCD Projection TV

Setting Up the LCD projection TV Automatically

Using Auto Setup
42
After you finish connecting your LCD projection TV, you can run Auto
Setup to set up your channels. The Auto Setup screen appears when you turn
your LCD projection TV on for the first time after installing it. If you do not
want to set up the channels at this time, you can do it later by using the Auto
Program feature in the Channel menu (see page 63).
The Auto Setup feature does not apply for installations that use a cable
box for all channel selection.
1
Press POWER on the front panel of your LCD projection TV or on the
remote control to turn on the LCD projection TV.
2
Press the TV (FUNCTION) button on your remote control. Red light will
briefly appear.
3
Press CH+ on your LCD projection TV to run Auto Setup, or press CH–
to exit. If you use the channel buttons on your remote control, be sure to
use the main set of buttons ( ).
LCD projection TV front panel
LAMP
You can run Auto Program by selecting it in the Channel menu, as
described on page 63.
STEREO TIMER/STAND BY