I.link Setup - Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual

Using i.LINK

i.LINK Setup

To Do This ...
Set up the selected device
Set up Caption Vision
Set up i.LINK Analog Video
(Set-Top Box)
Notes on i.LINK
❑
The LCD projection TV can act as an i.LINK repeater, so that i.LINK signals are be relayed to another
device even when the LCD projection TV is powered off. To enable this feature, set the
option to On using the Setup Menu as described on page 105.
❑
Parental Control settings apply to the signal from a selected device. For more details, see page 98.
86
You can use the i.LINK Control Panel to access digital setup options, some
of which are also available through the Digital Program Guide (described on
page 62).
Do This ...
Press V v B b to highlight
Once i.LINK Setup has been selected, Press b then V or v to
press .
✍
For details about setting up Caption Vision , see "Customizing Caption
Vision" on page 63.
The LCD projection TV is able to accept an analog signal from a selected set-top
box. The set-top box must be EIA-775A compliant and must be connected to the
LCD projection TV's VIDEO 3 input. To associate the device with the LCD
projection TV's analog VIDEO 3 input, press V or v to select to
press . All EIA-775A-compliant devices will be shown in the list. Select the
desired device from the list and press
Setup and press .
.
Caption Vision, and
Analog Video
and
i.LINK Standby