Setting Up The Lcd Projection Tv Automatically - Sony KF-42WE620 Operating Instructions Manual

Setting Up the LCD projection TV Automatically

Using Auto Setup
After you finish connecting your LCD projection TV, you can run Auto
Setup to set up your channels. The Auto Setup screen appears when you turn
your LCD projection TV on for the first time after installing it. If you do not
want to set up the channels at this time or are using an antenna, you can do it
later by using the Auto Program feature in the Channel menu (see page 67).
✍
The Auto Setup feature does not apply for installations that use a cable
box for all channel selection.
1
Press POWER on the front panel of your LCD projection TV or on the
remote control to turn on the LCD projection TV.
2
Press TV FUNCTION on the remote control until the TV indicator
lights up.
3
Press CHANNEL+ on your LCD projection TV to run Auto Setup, or
press CHANNEL– to exit. If you use the channel buttons on your remote
control, be sure to use
LCD projection TV front panel
✍
You can run Auto Program by selecting it in the Channel menu, as
described on page 67.
Installing and Connecting the LCD Projection TV
CH .
CHANNEL
TV/VIDEO
VOLUME
47