Setting Up The Lcd Projection Tv Automatically - Sony KF-50XBR800 Service Manual

Installing and Connecting the LCD Projection TV

Setting Up the LCD projection TV Automatically

Using Auto Setup
44
After you finish connecting your LCD projection TV, you can run Auto
Setup to set up your channels. The Auto Setup screen appears when you turn
your LCD projection TV on for the first time after installing it. If you do not
want to set up the channels at this time, you can do it later by using the Auto
Program feature in the Channel menu (see page 73).
✍
The Auto Setup feature does not apply for installations that use a cable
box for all channel selection.
1
Press POWER on the front panel of your LCD projection TV or on the
remote control to turn on the LCD projection TV.
2
Press
FUNCTION
3
Press on your LCD projection TV to run Auto Setup, or press
CH+
to exit. If you use the channel buttons on your remote control, be sure to
use .
LCD projection TV front panel
LAMP
✍
You can run Auto Program by selecting it in the Channel menu, as
described on page 73.
on the remote control until the TV indicator lights up.
TIMER STAND BY
CH–