Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual page 113

General
Problem
How to restore Video settings
to factory settings
How to restore Audio settings
to factory settings
Cannot cycle through the other
video equipment connected to
the LCD projection TV
Cannot operate Menu
Lost password
The signal from a selected
i.LINK device is not being
displayed
Possible Remedies
❏
RESET
Press on the remote control while in the Video Menu (see page 88).
❏
RESET
Press on the remote control while in the Audio Menu (see page 92).
❏
Video Label
Be sure the
❏
If a menu option appears in gray, this indicates that the menu option is not
available.
❏
In the password screen (see page 98), enter the following master password: 4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
❏
The i.LINK STANDBY LED blinks when the signal from an i.LINK device is
being shown.
❏
If you have several i.LINK devices connected and operating at once, the LCD
projection TV may not be able to display the signal from the selected device. Turn
the other i.LINK devices off, and reselect the desired i.LINK device.
Skip
option is not set to (see page 103).
Other Information
113