Watching The Tv - Sony GRAND WEGA KDF-60XBR950 Operating Instructions Manual

Using the Features

Watching the TV

Buttons for LCD
Projection TV
Operations
RM-Y1000
52
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
1 FUNCTION
Press until the TV indicator lights up.
This activates the remote control for use with the LCD projection TV.
2 ANT
Press to change between the VHF/UHF input and the CABLE input.
3 POWER
Press to turn the LCD projection TV on and off. If a video input indication
(e.g., VIDEO 1, VIDEO 2) appears on the screen, press
until a channel number appears.
CH +/ –
4 0-9,
and ENTER
Use for direct channel selection. Press
example, to select channel 10, press 1 and 0). The channel will change after
3 seconds, or you can press
For digital subchannels, press 0-9,
ENTER.
You can also select digital channels using the digital program guide. See
z
page 60 for details.
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
7 JUMP
Press to jump back and forth between the current channel and the last
channel selected.
8 MUTING
Press to mute the sound. "MUTING" will appear on the screen and will dim
three seconds later. To restore the sound, press again or press
9 FREEZE
This is useful when you need to copy down information that appears on the
LCD projection TV's screen (see "Using the Freeze Function" on page 58).
0-9
to select an analog channel (for
ENTER for immediate selection.
0-9
, press
TV/VIDEO or
again, and then
.
VOL +