Storage - Silvercrest SFM 850 A4 Operating Instructions Manual

■ Clean the appliance lid in warm water using a mild detergent . Rinse the
appliance lid off with clear water . Dry the appliance lid well and then place
it upright on its side so that any excess water still inside the lid can drain
away . Be aware that the lid must be completely dry before re-use!
■ Clean the permanent metal filter 1 in warm water with a little detergent,
then rinse it with clear water .
4) Dry all parts well before assembly .
5) Replace the permanent metal filter 1 in the cavity in the device lid and close
cover over the permanent metal filter 1 .
6) Replace the lid on the appliance so that the hinges grip into the hinge supports
on the rear side of the appliance and sit firmly in place .
NOTE
► Any other servicing should be performed by an authorized service
representative or Customer Service .

Storage

1) Lift or carry the appliance using the side handles 3 on the housing .
2) Wrap the power cable around the cable retainer 4 on the rear of the
appliance . Push one of the pins of the mains plug into one of the holes on the
cable retainer 4 to hold the mains plug in place:
3) The handle 0 of the frying basket q can be removed for storage and laid in
the frying basket q so that frying basket q can be placed in the deep fat
fryer .
4) Store the appliance with the appliance lid closed . This will keep the inside of
the deep fat fryer clean and free of dust .
SFM 850 A4 GB │ IE │ NI │ CY │ 17 ■