HPE Smart Array P824i-p MR Gen10 User Manual page 45

The Success screen appears to state that the operation is performed successfully.
Managing link speed
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Manage Link Speed.
4. In the Manage Link Speed screen, view the PHY settings for the controller and modify as needed.
5. Click OK.
The Success screen appears to state that the system must be restarted for the changes to take effect.
Managing advanced SW options
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Manage MegaRAID Advanced Software
Options.
4. In the Manage MegaRAID Advanced Software Options screen, view the list of advanced options that
are currently enabled.
NOTE: In this version of the controller, all of the advanced software options are activated.
Scheduling a consistency check
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Schedule Consistency Check.
4. In the Schedule Consistency Check screen, select the frequency.
5. Assign the start date for the consistency check.
6. Assign the start time for the consistency check.
7. Select the consistency check mode. The options are:
• Sequential - checks the logical drives one at a time.
• Concurrent - checks all of the logical drives simultaneously.
Configuration 45