Controller Management - HPE Smart Array P824i-p MR Gen10 User Manual

The Success screen appears to confirm that the operation completed successfully. For the drive status
change to reflect on the Drive Management screen, refresh the view.
Clearing a configuration
WARNING: Clearing a configuration deletes all of the logical drives and spare drives attached to the
controller.
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Configuration Management > Clear Configuration.
2. In the Warning message screen, click Confirm and Yes to proceed.
The Success screen appears to notify that the operation has been performed successfully.

Controller management

Managing the controller
Procedure
1. From the System Utilities screen, select System Configuration > HPE Smart Array P824i-p MR
Gen10 > Main Menu > Controller Management.
2. In the Controller Management screen, view the basic properties of the controller:
Property
Product name
Serial number
Controller status
Select Boot Device
PCI ID
PCI Slot Number
Active package version
Backup package version
CPLD version
Connector count
Drive count
Logical drive count
3. Click Advanced Controller Management to perform advanced controller tasks.
Description
The name of the controller
Controller serial number
Possible options are Optimal, Needs Attention,
Failed, or Safe Mode
The selected primary bootable device
Manufacturer-assigned ID
ID of the PCI Slot that contains the controller
Active version of the controller package
Backup version of the controller package
CPLD version
Number of host data ports/connectors on the
controller
Number of drives currently attached to this
controller
Number of logical drives on the controller
Configuration 43