Partner SP-26 Series Quick Start Manual

SP-26XX Series Quick Start Guide
警告
使用過度恐傷視力�
注意事項
使用 分鐘請休息 分鐘� 未滿 歲幼兒不看螢幕,
30 10 2
WARNING
The system uses a 3 V CR 2032 battery mounted on the mainboard to keep time. There
is a risk of explosion if the wrong battery type is used when replacing. Dispose of used
batteries according to local ordinance regulations.
WARNING
This is Class A Product. In domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
警告使用者
這是甲類的資訊產品 ， 在居住的環境中使用時 ， 可能會造成射頻干擾 ， 在這種情況下 ， 使用者會被要求採
取某些適當的對策 。
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to correct
the interference at their own expense

Safety information

• Before installing and using the machine, take note of the following precautions:
• Do not place the unit on an unstable surface, cart, or stand.
• Do not block the slots and opening on the unit, which are provided for ventilation.
• Only use the power source indicated on the marking label. If you are not sure, contact
your dealer or the Power Company.
• When replacing parts, ensure that your service technician uses parts specified by the
manufacturer.
• Do not place anything on the power cord. Place the power cord where it will not be in
the way of foot traffic.
歲以上每天看螢幕不要超過 小時�
2 1

Identifying components

Camera
MSR
IC Card
Reader
2 D Scanner RFID
iButton/
Fingerprint
3 optional display sizes
LPT HDMI
DC 12 V-In
DC 12 V-Out
USB 3 . 0
RJ- 11 Cash
drawer port
NOTE
• Optional peripherals are sold separately. (RFID and camera
are factory options)
• Camera and IC card reader can only choose one of two.
• Fingerprint and iButton can only choose one of two.
Power Button
LAN COM 4 COM 2
COM 3 Line Out
COM 1
Secondary
Monitor
I/O Cover
I/O Panel
USB 12 V* USB 24 V*
VGA 2 * VGA 1
(*optional)