Ricoh Pro C901S Manual page 27

0220: Adjust Density Difference Across Feed Direction
Adjust the image density difference between the top and bottom of the image.
Press [+] to increase the density at the bottom (and decrease it at the top) and
press [-] to decrease the density at the bottom (and increase it at the top).
Black
Cyan
Magenta
Yellow
0701: ADF Scanning Density Adjustment (RGB)
Adjust the scanning density of thin paper originals fed from the ADF.
If you wish to adjust the scanning density of thin paper originals fed from the ADF,
set this to "On".
ADF Scanning Density Adjustment (RGB)
Specify the scanning density for red, green, and blue as a percentage of the
normal scanning density.
R Adjustment
G Adjustment
B Adjustment
Note:
• This function is available only on Pro C901S.
2. Details of Menu Items in Adjustment Settings for Skilled Operators Menu
Setting
Setting
Setting
BZS204
Default Max.
Value Value
0 5
Selection
On
Off
Default Max.
Value Value
95 100
27
Min. Step
Value
-5 1 None
Default Value
Off
Min. Step
Value
80 1 %
Unit
Unit