Ricoh Pro C901S Manual page 16

No
0504 Paper Alignment in 2nd
Stacker Tray Across Feed
Dir. 1
0505 Paper Alignment in 2nd
Stacker Tray With Feed
Direction
0506 Paper Alignment in 2nd
Stacker Tray Across Feed
Dir. 2
0507 Maximum Stack Quantity
in Stacker Tray
Other Function
For details about the following items, see, p.55 "Other Function".
No
0702 Switch Print Screen
0801 Productivity Priority Mode
2. Details of Menu Items in Adjustment Settings for Skilled Operators Menu
Item
Adjust the width of the main jogger in order to reduce
vertical variation in paper alignment due to difference in
size, thickness, and curl of paper, when the second
stacker is installed.
Adjust the travel distance of the paper edge stopper in
order to reduce horizontal variation in paper alignment
due to difference in size, thickness, and curl of paper,
when the second stacker is installed.
Adjust the width of the sub jogger in order to reduce ver-
tical variation in paper alignment due to difference in
size, thickness, and curl of paper, when the second
stacker is installed.
Set the maximum number of sheets for the stacker tray.
The maximum number of sheets you can set differs de-
pending on the size, thickness, and curl of paper.
Set the maximum number by specifying a ratio based on
the number of sheets.
If the unit detects that the number of sheets reaches the
set upper limit, it will generate a warning message.
Item
Select the mode that appears when [To Print Screen] is
pressed: copier mode or printer mode. This function is
only for Pro C901S.
Specify whether or not to favor throughput on a job that
involves printing on thick and then on thin paper.
Description
Description
16